mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-06-13 23:36:45 +03:00
Chris Lu
79ac279fe1
* feat(ec): add encode_ts_ns to EC shard metadata and the shard read RPC EcShardConfig and VolumeEcShardReadRequest gain an int64 encode_ts_ns (encode time in unix nanos). It rides in .vif and the read request so a read can be scoped to the encode run that produced the index. * fix(ec): stamp each encode and reject cross-run shard reads Generate stamps EncodeTsNs into the volume's .vif. Reads carry it to the shard's owning volume (resolved together via FindEcVolumeWithShard, so a multi-disk server validates the disk that actually serves the bytes) and reject a shard from a different encode run, recovering from parity. A zero on either side (pre-upgrade volume) skips the guard. * fix(ec): stamp the encode identity on the worker-generated .vif The worker-local encode path now writes EncodeTsNs (and the resolved EC ratio) into the .vif, so the read guard is not silently off for volumes encoded by the maintenance worker. * fix(ec): wipe stale EC artifacts before re-encoding VolumeEcShardsGenerate evicts any in-memory EcVolume for the volume and removes its on-disk shard/index/sidecar files before writing fresh ones, so a retried encode never builds on a partial prior run and the unlink frees the inodes instead of leaving open fds serving old bytes. * fix(ec): unmount EC shards across all disks UnmountEcShards walked only the first disk holding the shard, leaving a duplicate copy mounted on a sibling disk (split-disk reconciled volumes) still serving and heartbeating. Traverse every disk and emit one deletion delta per disk. * fix(ec): delete orphan shards without a local .ecx deleteEcShardIdsForEachLocation gated shard-file removal on a local .ecx, so it could not clean an orphan .ecNN left by a failed copy on a disk with no index. Delete the requested shard files unconditionally; the index-file (.ecx/.ecj/.vif) routing stays gated as before. * fix(ec): clear stale EC shards cluster-wide before re-encoding ec.encode unmounts and deletes EC shards for the target volumes on every node before regenerating: fatal for the shards the topology reports (mounted leftovers), best-effort for the rest (a sweep that catches unmounted failed-copy orphans). A down node is a no-op. * fix(ec): don't nil EC fds on close so reads can't race eviction A reader resolves an EcVolume/shard under the lock then reads after it is released, so an eviction that nils ecxFile/ecdFile would race that read and panic. Close the fds without nilling the fields: the field is now write-once (no data race) and a concurrent read hits a closed fd, getting a clean error that the caller recovers from parity. * fix(ec): wipe stale EC artifacts on every disk and surface failures The pre-encode wipe only deleted beside the source volume, so a stale shard on a sibling disk survived and could be mounted against the new index at reconcile. Sweep every disk. Removal also ignored os.Remove errors, reporting a failed cleanup as success and letting a stale shard join the next generation; surface the first real failure (treating already-gone as success) from removeStaleEcArtifacts and the shard delete. * fix(ec): log when a local shard is skipped for a different encode run The cross-run guard returned errShardNotLocal, indistinguishable in logs from a genuinely-absent shard. Add a V(1) line naming both EncodeTsNs so operators can tell "wrong encode generation" from "shard not here". * fix(ec): surface metadata removal failures in the shard delete path deleteEcShardIdsForEachLocation still dropped os.Remove errors on the .ecx/.ecj/.vif/sidecar cleanup. A surviving stale .ecx is the orphan-index condition this path prevents, so route those through removeFileIfExists and return the first real failure instead of reporting cleanup as success. * fix(ec): fail orphan cleanup when a reachable node's delete fails The pre-encode orphan sweep swallowed every error for unreported (node, volume) pairs. That is only safe for an unreachable node, which cannot receive this encode's new generation. A reachable node whose delete genuinely failed (permission/IO) keeps an orphan shard that a later copy re-stamps with the new run's volume-level .vif identity, so the read guard would accept stale data. Surface those; stay best-effort only for unreachable nodes (gRPC Unavailable / no status). * fix(ec): guard ecjFile under its lock in the EC delete path EcVolume.Close nils ecjFile under ecjFileAccessLock; a delete that resolved its .ecx lookup before a concurrent eviction (the generate-time UnloadEcVolume) could then reach the journal append with a nil fd. Bail with a clear "volume closed" error under the lock instead. * fix(ec): reject an unstamped shard when the caller has an encode identity The read guard required both identities nonzero, so a current (stamped) caller accepted a holder with identity 0 and could be served a stale pre-upgrade shard. Reject when the caller is stamped and the holder differs (including unstamped); stay lenient only when the caller itself has no identity (pre-upgrade reader). A skipped shard recovers from parity. * fix(ec): full-teardown delete so cluster cleanup wipes a whole generation The pre-encode cluster sweep deleted only the listed canonical shards on remote nodes, leaving index/sidecar (and, on builds with versioned generations, those too) behind. Add a full_teardown flag to VolumeEcShardsDelete that evicts the volume and wipes every EC artifact for it on every disk via removeStaleEcArtifacts; the shell and worker pre-encode cleanup paths set it. Other delete callers (balance/decode/repair) are unchanged. * fix(ec): take ecjFileAccessLock before the nil-check in Sync and Close Sync and Close read ev.ecjFile before acquiring ecjFileAccessLock while Close nils it under the lock, a data race on the field. Take the lock first, then nil-check inside, in both. * fix(ec): acknowledge full_teardown so a pre-upgrade server can't fake success An old volume server silently ignores full_teardown and returns success for an ordinary delete, so the caller wrongly believes the generation was wiped and copies a fresh gen-0 onto an unwiped node. Echo full_teardown_done in the response; the worker destination cleanup fails when it is absent, and the shell cluster sweep fails for a reported (mounted) leftover while staying best-effort for an unreported node. encode_ts_ns stays an accepted transient (an old server just skips the new read guard, no regression). * fix(ec): fail the pre-encode sweep for any reachable node that can't ack teardown A reachable pre-upgrade server ignores full_teardown and returns success without wiping an orphan, which a later copy then folds into the new generation. Treat a missing full_teardown_done ack as fatal for every reachable node (best-effort only for a gRPC-unreachable one), not just for topology-reported pairs. * fix(ec): return the served shard identity and validate it client-side The encode identity was only enforced server-side, so a pre-upgrade server ignored the request field and served bytes unchecked. Echo the served shard's EncodeTsNs on every read response chunk and have the client reject a mismatch (including 0 from an old server), so the guard holds regardless of server version; a rejected read recovers from parity. * fix(ec): reject a short/empty remote shard read instead of serving zeros doReadRemoteEcShardInterval accepted an immediate EOF or a short stream and returned success with a partly zero-filled, unvalidated buffer (the server stamps the identity only on chunks that carry bytes). A non-deleted interval must arrive whole: require n == len(buf), exempting the is_deleted short-circuit (n=0), matching readLocalEcShardInterval's local check. A short read now fails so the caller recovers from parity. * test(ec): fake volume server echoes the full_teardown acknowledgement The worker now fails a teardown delete that isn't acknowledged (so a pre-upgrade server can't silently skip the wipe). The fake server's no-op VolumeEcShardsDelete returned an empty response, which the worker read as a skipped teardown and aborted the encode. Echo full_teardown_done. * feat(ec): mirror the encode-run identity guard + full_teardown into the Rust volume server The Go volume server stamps an encode-run identity (encode_ts_ns) into the .vif and rejects a read served from a shard of a different run; full_teardown wipes a whole generation and acknowledges it. The Rust volume server had none of it. Mirror the shared logic: load encode_ts_ns from the .vif onto the EcVolume, stamp it on every read response, and reject a request/response mismatch on both the server and the distributed-read client (recovering from parity); handle full_teardown by evicting the volume and wiping every EC artifact on each disk, echoing full_teardown_done so the caller can detect a server that ignored it. * fix(ec): remove a stale .vif on full teardown of a shard-only node A shard copy installs shards + .ecx before .vif, so an interrupted copy after a teardown could mount the new files under the previous run's identity / version / shard ratio / dat_file_size carried by the surviving .vif. Remove .vif during full teardown, gated on .idx absence so a source-volume holder keeps its live .vif. In Rust this lives in a teardown-only helper so the reconcile / load- fallback paths (which share the base removal) still preserve .vif. * fix(ec): treat a missing teardown ack as fatal, not as an unreachable node isNodeUnreachable returned true for any non-gRPC-status error, so a reachable pre-upgrade server's missing full_teardown_done ack (a plain error) was classified unreachable and the unreported pair was silently skipped. Classify only a real codes.Unavailable as unreachable, and wrap the missing ack in a sentinel the sweep treats as fatal regardless. A genuinely down node still surfaces as Unavailable from the RPC and stays best-effort. * fix(ec): reject a short shard read in the local EC needle reader read_ec_shard_needle ignored the byte count from shard.read_at and appended the whole pre-sized buffer, so a truncated shard's zero-filled tail passed the later length check and parsed as garbage. Require n == buf.len() per interval, erroring on a short read like the local interval reader already does. * fix(ec): probe reachability before skipping a node that returns Unavailable The pre-encode sweep skipped any node whose teardown delete returned codes.Unavailable, but a reachable volume server in maintenance mode also returns that code for the maintenance-gated delete, so its stale EC files were left behind on a node that can still receive the new generation. Confirm with a non-maintenance-gated empty-target Ping: skip only when the node fails the probe too (genuinely unreachable). * fix(ec): use try_exists for the teardown .vif .idx guard The teardown-only .vif removal gated on Path::exists(), which returns false on a permission/IO stat error, so a stat failure on a present .idx would read as a shard-only node and delete the live source volume's .vif. Gate on try_exists() == Ok(false) instead, preserving the sidecar on any stat error. * fix(ec): only skip a sweep node when a Ping confirms it is transport-down The pre-encode sweep skipped a node whenever its teardown delete and a liveness Ping both failed, but it treated ANY Ping error as down — an application-level Internal/ResourceExhausted, or Unimplemented from a pre-Ping server, left a reachable node's stale generation in place. Classify the Ping tri-state and skip only when it transport-fails with codes.Unavailable; a reachable or inconclusive node stays fatal. * fix(ec): exclude sweep-skipped nodes from the encode's rebalance The pre-encode sweep skips a genuinely-down node best-effort, but the rebalance then recollected the current topology — a node that recovered between the two could become a copy target and receive the new generation while still holding its stale, never-cleared shards. Have the sweep return the skipped set and exclude those nodes from the rebalance for this encode, so a node we could not clean cannot receive the new generation. Standalone ec.balance is unaffected. * fix(ec): re-sweep recovered nodes before generation so they aren't stranded A node skipped as down by the pre-encode sweep is excluded from the rebalance, but it can recover and become the generation host — mounting all shards locally, then being excluded from distribution. Union-only verification accepts all shards on one node and deletes the originals: a single point of failure. Re-sweep the skipped nodes just before generation; one whose teardown now succeeds leaves the skipped set and rebalances normally, while a node still down stays skipped. * fix(ec): abort the encode if a selected source is still skipped after re-sweep The re-sweep un-skips a recovered node, but the source was selected before it and a node can stay down through the re-sweep then recover just in time to be the generation host — mounting all shards locally while still excluded from the rebalance, which union-only verification accepts before deleting the originals. Abort the encode when a selected source remains skipped after the re-sweep. * fix(ec): batch delete returns retriable 503 when a volume became EC mid-batch If a volume is not EC at the batch-delete classification but is encoded to EC and its .dat deleted before the regular-volume mutation, the mutation returns an exact "not found" that the filer chunk-GC treats as completed, dropping the delete. Recheck EC presence under the mutation lock and return a retriable 503 with the "try again" token so the filer requeues it onto the EC path. * fix(ec): recheck EC state before the regular batch-delete mutation ec.encode mounts EC shards (copied from the .dat) before deleting the originals, so a volume can be EC while its .dat still exists. The batch delete only rechecked EC after a NotFound, so a successful regular-volume delete in that window wrote a tombstone to the soon-removed .dat — the delete was lost and the needle resurrected from the pre-tombstone shards. Recheck has_ec_volume under the write lock before delete_volume_needle and return a retriable 503 so the filer requeues onto the EC path. * fix(volume): make the metrics push test independent of test order test_push_metrics_once asserted the pushed body contains the request-counter family without ever touching the counter — a CounterVec with no children emits nothing, so the assertion only held when another test had already created a labelset in the shared registry. Create one in the test itself.
80 lines
2.6 KiB
Go
80 lines
2.6 KiB
Go
package shell
|
|
|
|
import (
|
|
"flag"
|
|
"io"
|
|
|
|
"github.com/seaweedfs/seaweedfs/weed/glog"
|
|
"github.com/seaweedfs/seaweedfs/weed/storage/types"
|
|
)
|
|
|
|
func init() {
|
|
Commands = append(Commands, &commandEcBalance{})
|
|
}
|
|
|
|
type commandEcBalance struct {
|
|
}
|
|
|
|
func (c *commandEcBalance) Name() string {
|
|
return "ec.balance"
|
|
}
|
|
|
|
func (c *commandEcBalance) Help() string {
|
|
return `balance all ec shards among all racks and volume servers
|
|
|
|
ec.balance [-c EACH_COLLECTION|<collection_name>] [-apply] [-dataCenter <data_center>] [-shardReplicaPlacement <replica_placement>] [-diskType <disk_type>]
|
|
|
|
Options:
|
|
-diskType: the disk type for EC shards (hdd, ssd, or empty for default hdd)
|
|
|
|
Algorithm:
|
|
` + ecBalanceAlgorithmDescription
|
|
}
|
|
|
|
func (c *commandEcBalance) HasTag(CommandTag) bool {
|
|
return false
|
|
}
|
|
|
|
func (c *commandEcBalance) Do(args []string, commandEnv *CommandEnv, writer io.Writer) (err error) {
|
|
balanceCommand := flag.NewFlagSet(c.Name(), flag.ContinueOnError)
|
|
collection := balanceCommand.String("collection", "EACH_COLLECTION", "collection name, or \"EACH_COLLECTION\" for each collection")
|
|
dc := balanceCommand.String("dataCenter", "", "only apply the balancing for this dataCenter")
|
|
shardReplicaPlacement := balanceCommand.String("shardReplicaPlacement", "", "replica placement for EC shards, or master default if empty")
|
|
diskTypeStr := balanceCommand.String("diskType", "", "the disk type for EC shards (hdd, ssd, or empty for default hdd)")
|
|
maxParallelization := balanceCommand.Int("maxParallelization", DefaultMaxParallelization, "run up to X tasks in parallel, whenever possible")
|
|
applyBalancing := balanceCommand.Bool("apply", false, "apply the balancing plan")
|
|
// TODO: remove this alias
|
|
applyBalancingAlias := balanceCommand.Bool("force", false, "apply the balancing plan (alias for -apply)")
|
|
|
|
if err = balanceCommand.Parse(args); err != nil {
|
|
return nil
|
|
}
|
|
|
|
handleDeprecatedForceFlag(writer, balanceCommand, applyBalancingAlias, applyBalancing)
|
|
infoAboutSimulationMode(writer, *applyBalancing, "-apply")
|
|
|
|
if err = commandEnv.confirmIsLocked(args); err != nil {
|
|
return
|
|
}
|
|
|
|
var collections []string
|
|
if *collection == "EACH_COLLECTION" {
|
|
collections, err = ListCollectionNames(commandEnv, false, true)
|
|
if err != nil {
|
|
return err
|
|
}
|
|
} else {
|
|
collections = append(collections, *collection)
|
|
}
|
|
glog.V(1).Infof("balanceEcVolumes collections %+v\n", len(collections))
|
|
|
|
rp, err := parseReplicaPlacementArg(commandEnv, *shardReplicaPlacement)
|
|
if err != nil {
|
|
return err
|
|
}
|
|
|
|
diskType := types.ToDiskType(*diskTypeStr)
|
|
|
|
return EcBalance(commandEnv, collections, *dc, rp, diskType, *maxParallelization, *applyBalancing, nil)
|
|
}
|